Welcome to Falls Cosmetic Dentis Center
Dr. Chandy Samuel DDS, PA
Cosmetic & Restorative Dentist Pembroke Pines, Florida

 

Patient Care & Services:
Porcelain Veneers

Veneers, ultra-thin, custom-made laminates that are bonded directly to the teeth, are an increasingly popular procedure. They are an option for closing gaps or disguising discolored teeth that did not respond well to whitening procedures.

In dentistry, a veneer is a thin layer of restorative material placed over a tooth surface, either to improve the aesthetics of a tooth, or to protect a damaged tooth surface. There are two types of material used in a veneer, composite and porcelain. A composite veneer may be directly placed (built-up in the mouth), or indirectly fabricated by a dental technician in a dental laboratory, and later bonded to the tooth, typically using a resin cement. In contrast, a porcelain veneer may only be indirectly fabricated.

Usage
The advantages of using a veneer to restore a tooth are many. Very good aesthetics can be obtained, with minimal tooth preparation (i.e. drilling). Normally a reduction of around 0.5 mm is required for a porcelain veneer on a labial tooth surface. Composite veneers are becoming more popular as they are easy to repair, whereas porcelain veneers have a tendency to fracture. It can be very difficult to match the shade of an individual veneer to the remaining teeth, hence the tendency to place several veneers.
Veneers may be used cosmetically to resurface teeth such as to make them appear straighter and possess a more aesthetically pleasing alignment. This may be a quick way to improve the appearance of malposed teeth without need to use orthodontics. However, the amount of malposition of teeth may be such that veneers alone may not be enough to correct the esthetic imbalance. Instead, orthodontics would need to be used, or orthodontics combined with veneers. The dentist who places veneers must be careful since veneers could increase the thickness of the front face of the teeth. If the teeth are too thick on the face they may appear to stand out and push out the lips. The effect may be enough to give the patient a full or chipmunk appearance when the lips are closed. Veneers must also be created such that the patient bites into them with minimal force. Otherwise, they may chip off. So, patients whose lower jaw protrudes out farther than their upper jaw, otherwise known as a class III bite, may not be good candidates for veneers because the teeth of the lower jaw may bite into the teeth of the upper jaw such as to dislodge the veneers.


Contact Falls Cosmetic Dental Center

1601 N. Flamingo Rd Ste 3
Pembroke Pines, Fl 33028

We are located in the S.E. corner of Flamingo and Taft

Phone: 954.437.7077

Fax: 954.437.7466

E-mail: info@fallscosmeticdental.com

Office Hours:

Monday - Thursday 8:00 am to 6:00 pm

Dr. Chandy Samuel DDS, PA - Providing services in cosmetic dentistry to the areas of:


Coconut Creek | Cooper City | Coral Springs | Dania Beach | Davie | Deerfield Beach | Hallandale Beach | Hillsboro Beach | Hollywood | Lauderhill | Lauderdale Lakes | Lauderdale-By-The-Sea | Lazy Lake | Lighthouse Point | Margate | Miramar | North Lauderdale | Oakland Park | Parkland | Pembroke Park | Pembroke Pines | Plantation | Pompano Beach | Sea Ranch Lakes | Southwest Ranches | Sunrise & Sawgrass Mills | Weston | West Park | Wilton Manors


33004 | 33009 | 33019 | 33020 | 33021 | 33022 | 33023 | 33024 | 33025 | 33026 | 33027 | 33028 | 33029 | 33081 | 33060 | 33062 | 33064 | 33066 | 33067 | 33068 | 33069 | 33071 | 33073 | 33076 | 33093 | 33301 | 33302 | 33303 | 33304 | 33305 | 33306 | 33307 | 33308 | 33309 | 33310 | 33312 | 33313 | 33314 | 33315 | 33316 | 33317 | 33318 | 33319 | 33320 | 33073 | 33311 | 33321 | 33322 | 33323 | 33324 | 33325 | 33326 | 33327 | 33328 | 33329 | 33330 | 33331 | 33332 | 33334 | 33335 | 33337 | 33338 | 33339 | 33340 | 33063 | 33065 | 33349 | 33345 | 33346 | 33348 | 33351 | 33355 | 33359 | 33388 | 33394 | 33441 | 33442


© copyright 2007, Falls Cosmetic Dental Center, all rights reserved

Powered by ITNL